Affiliate disclosure: This post contains an affiliate link. If you buy through my link, I may earn a small commission at no extra cost to you.
Check the book here:
[Understanding and Troubleshooting VFD Drives]
I recently read Understanding and Troubleshooting VFD Drives, and I found some useful information in it.
If you are learning about Variable Frequency Drives, also called VFDs, this book can be a good starting point. It is especially useful if you are a student, beginner, electrician, or maintenance technician who wants to understand how VFDs work and how to troubleshoot common problems.
VFDs are used everywhere in industry. You can find them on pumps, fans, conveyors, compressors, mixers, and many other machines. But when you are new to them, they can feel confusing.
You have motor parameters, acceleration ramps, deceleration ramps, overcurrent faults, overvoltage faults, input and output wiring, control terminals, motor cable problems, braking resistors, and many other things to understand.
That is why I think a simple VFD-focused book can be useful.
What I Liked About This Book
The thing I liked most is that the book is focused on VFDs.
It is not a general automation book that only gives you a few pages about drives. It is more directly about understanding and troubleshooting VFD drives.
For beginners, that is helpful because VFDs can be difficult at first.
You need to understand:
What a VFD does
How it controls motor speed
How motor parameters affect operation
Why faults happen
How to approach troubleshooting
What common VFD problems look like
How wiring and motor issues can affect the drive
This book gave me useful information for building that basic understanding.
It is not going to make you a VFD expert overnight, but it can help you understand the topic better.
Good for Students and Beginners
I think this book is very good for students and beginners who are just starting to learn industrial automation, electrical maintenance, or motor control.
If you are new to VFDs, even simple things can be confusing.
For example:
Why does the drive trip on overcurrent?
Why does the motor not start?
Why does the drive show overvoltage during stopping?
Why do motor parameters matter?
Why is cable routing important?
What should you check first when troubleshooting?
A book like this can help give structure to those questions.
Instead of randomly searching online every time you see a fault, it is useful to have one resource that explains the basics in a more organized way.
Useful for Maintenance Technicians
I also think this book can be useful for maintenance technicians.
In real factory work, you do not always need deep theory first. Many times, you need to understand what is happening quickly so you can find the problem and get the machine running again.
A VFD fault is not always caused by the drive itself.
Sometimes the real issue is:
Wrong motor data
Loose wiring
Motor insulation problem
Mechanical overload
Brake not releasing
Short acceleration time
Too fast deceleration
Regenerative energy
Bad control signal
Damaged motor cable
Understanding these basic troubleshooting areas can save a lot of time.
That is why I think this book fits well for maintenance people who work with motors and drives.
Good First Step Before Deeper VFD Learning
This book is a good starting point, but I would not stop here if you want to become really strong with VFDs.
After reading a beginner-friendly book, you should also study:
Drive manuals
Motor nameplate data
Real VFD parameters
Wiring diagrams
Fault codes
Braking resistor sizing
EMI and cable routing
Practical commissioning steps
Real troubleshooting examples
The best learning happens when you combine reading with real practice.
But as a first step, this book can help make VFDs feel less confusing.
Who I Think This Book Is For
I would recommend this book for:
Electrical students
Beginner electricians
Maintenance technicians
Automation beginners
PLC learners
People learning motor control
Technicians working around pumps, fans, and conveyors
Anyone who wants to understand VFD troubleshooting better
If you already have years of experience commissioning and troubleshooting VFDs, this book may feel basic.
But if you are still learning, or if you want a simple VFD reference, I think it is worth checking out.
What This Book Will Not Replace
This book is useful, but it does not replace real hands-on experience.
VFD troubleshooting is practical work. You need to check wiring, measure voltage, check motor data, inspect mechanical load, read fault history, and understand the machine.
So I would use this book as a learning resource, not as the only source.
You should still read the manual for the actual drive you are working with, because every VFD brand and model has different parameters, fault codes, and wiring requirements.
Final Verdict
After reading Understanding and Troubleshooting VFD Drives, I think it is a useful book for anyone starting to learn VFDs.
It is especially good for students, beginners, electricians, and maintenance technicians who want to understand VFD basics and common troubleshooting problems.
I liked the information it gave, and I think it can help build a better foundation before moving into more advanced drive commissioning and industrial automation work.
My opinion is simple:
If you are learning VFDs and want a beginner-friendly book about understanding and troubleshooting them, this one is worth checking out.
Check the book here:
[Understanding and Troubleshooting VFD Drives]